How to inflate an inflatable paddle board

The inflatable paddle board is generally inflated through a special inflator or pump. Taking a certain brand of inflatable paddle board as an example, the specific inflation method steps are:

1. Open the valve cover by turning it clockwise, open the valve cover, and confirm that the valve needle is in a popped state.

2. Align the air pump hose with the air valve, insert the air valve needle vertically, and rotate it clockwise to tighten the air valve hole. Place your feet on the pump and start pumping.

3. Rotate the inflation hose counterclockwise and pull it out vertically.

4. Turn the air valve cover back clockwise to complete inflation.

When inflating the inflatable paddle board, be sure to control the inflation pressure. Too small or too large is not good.

Generally speaking, if the inflation pressure of an inflatable paddle board is too low, the paddle board will be soft, not comfortable for paddling, and unsafe; if the pressure is too high, it will cause greater damage to the paddle board, and the paddle board will easily twist over time. Mahua, or it is easy to explode if it is dried in the sun.