Anti-rust and anti-corrosion fishing rod

It is required that after the fishing rod is used, open the thread of the tail piece, rinse the sand, salt and other dirt back and forth in clean water, then wipe off the moisture on the surface with a dry rag, and finally place it in a cool and ventilated environment to dry Store when dry. If there is dirt that is not cleaned by brushing, please use soapy water, and do not use organic solvents such as gasoline and thinner or hard brushes. Pay special attention to the fact that fishing rods cannot be placed in high-temperature airtight places such as the trunk of a car for a long time. All the above work is to prevent the metal fittings from rusting and the surface paint of the pole body from discoloration, blistering and peeling off.