Different types of tent construction methods

2022-07-09

1. Triangular tent
(1) Lay the tent tent flat on the ground, flatten it and nail down the ground nails along the bottom edge.
(2) Support the two poles from the tent, cover the isolation tube, and then cover the cross pole.
(3) Cover the tent jacket and knock down the pull studs of the jacket to straighten all the outer tents.
(4) Put the rainproof cap into the end of the strut, and put on the wind-resistant cable to complete.
Note: There is a space between the inner and outer tents of the triangular double-layer tent. This space should be maintained. Do not "stick" the inner and outer layers together. This space can play a role in preventing rain and keeping warm.
2. Dome-shaped tent
(1) Lay the tent flat on the ground, and nail down the ground nails at the four corners (some are hexagonal). You can also stretch the tent poles and then nail the ground nails.
(2) Bind the two sets of canopy rods (three sets for the hexagonal dome). If the canopy rods are loose parts, they need to be connected according to the instruction manual.
(3) Insert the tent poles into the support sleeves of the tent, insert each end of the two groups into the sleeve holes, and stretch the other ends of the two groups of poles at the same time, and insert them into the other sleeve holes after they are tightened.
(4) Lift the tent and shake it into shape to lay it flat on the ground and hit the ground nails. If you have a jacket, put on a jacket or a small rain cover and you're done.




We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept